22-23 Ford Maverick 2.0L / 20-23 Ranger 2.3L EcoBoost Nostrum High Performance H750‐1584 High Flow Injectors

Nostrum High Flow Injectors – H750‑1584 | Fits 22–23 Ford Maverick 2.0L & 20–23 Ranger 2.3L EcoBoost

Nostrum’s H750‑1584 high‑flow injectors offer a direct replacement solution for the Ford Maverick 2.0 L and Ranger 2.3 L EcoBoost engines (model years 2022–2023 for Maverick, 2020–2023 for Ranger). Engineered to deliver a 40 % increase in fuel flow over OEM injectors, these injectors enable substantially higher horsepower potential—up to approximately 710 WHP on pump gasoline and around 525 WHP on E85 fuel. Designed with OEM‑level spray pattern quality and built to 250 bar max pressure, they are ethanol compatible and fully tune‑ready

Key Features

• Direct OEM‑equivalent replacement for hassle‑free installation

• 40 % greater fuel flow than stock injectors (approx. 19.7 g/s @100 bar)

• Max operating pressure rated to 250 bar (≈3,626 psi)

• OEM‑quality spray pattern for smooth idle and reliable drivability

• Full tuning guide support (HP Tuners, SCT, HPTuners) included

• Comprehensive installation instructions with all necessary hardware included

• Ethanol‑compatible design for E85 or pump gas flexibility

• Limited lifetime warranty ensures long‑term peace of mind

Benefits

• Enables substantial horsepower gains—up to ~710 WHP when properly tuned

• Supports use of pump E85 or high‑octane fuels for greater performance

• Superior drivability and idle quality thanks to OEM‑level spray detail

• Maintains full ECU diagnostics and engine safety systems—no extra controllers required

• Limited lifetime warranty protects your investment

• Detailed instructions and tuning guides streamline installation and setup

• Expert support available from MPT Performance calibration engineers

Product Specs

• Size: Standard injector dimensions matching OEM form factor

• Material: High‑grade injector internals rated for sustained high pressure

• Fuel flow: ~19.7 g/s @100 bar (~40 % increase over stock)

• Max pressure rating: 250 bar (≈3,626 psi)

• Compatibility: Ethanol blends including E85

• Color: Typical fuel injector metallic finish

• Warranty: Limited lifetime

Install Difficulty Level

Installation is straightforward and designed to feel nearly factory‑stock. All necessary hardware and a detailed installation guide are included in the box. According to installer feedback, the full job can take as little as 2 to 3 hours when performed by a moderately experienced DIYer—even less for pros. The process is plug‑and‑play, and no secondary fuel controllers or meth systems are required.

Vehicle Fitment

Compatible vehicles include:

• 2020, 2021, 2022, 2023 Ford Ranger with 2.3 L EcoBoost engine

• 2022, 2023 Ford Maverick with 2.0 L EcoBoost engine

CARB Status

No evidence was found that the H750‑1584 model holds a CARB Executive Order (EO) or other emissions approval. Therefore, this product is not carb‑approved and may not be legal for use in CARB‑regulated states.

If any questions arise about this product or to report product description inaccuracies, contact the MPT Performance experts at (407) 636‑7077 or by email.